Compliance
CE Marking and the Declaration of Conformity: What to Ask For on Hotel Electricals
A CE mark on a kettle, hair dryer or television is the manufacturer's own declaration. What the Low Voltage Directive covers, what the declaration of conformity should say, and what to request before you order.
By Anastasios Antoniou4 min readPublished
A CE mark on a hotel kettle, hair dryer or television is the manufacturer's statement that the product meets the EU rules that apply to it. It is not a quality mark. Ask for the EU declaration of conformity, check that it names the exact model and the directives, and keep it, because the manufacturer must hold it for 10 years.
Most hotel electricals in Europe sit under the Low Voltage Directive, which is why the declaration is the document an inspector, insurer or brand auditor is most likely to ask you for.
What does the Low Voltage Directive cover?
Directive 2014/35/EU applies to electrical equipment designed for use with a voltage rating of between 50 and 1,000 V for alternating current and between 75 and 1,500 V for direct current, apart from the equipment listed in its Annex II. A mains kettle, hair dryer, minibar, lamp and television all fall into that range. A low-voltage USB charger on its own does not, but the mains power supply that feeds it does.
Under the directive, manufacturers must draw up an EU declaration of conformity and affix the CE marking, and must keep the technical documentation and the declaration for 10 years after the equipment is placed on the market (EUR-Lex, Directive 2014/35/EU). Importers and distributors carry duties too, including checking that the marking and documents are present.
Which other EU rules might apply?
The declaration is meant to be a single document listing every Union act that applies to the product. Depending on the item, that can include the EMC Directive for electromagnetic compatibility, the Radio Equipment Directive for anything with Wi-Fi or Bluetooth, such as a smart television, and the RoHS rules on hazardous substances. The declaration should list the ones that apply and the standards the manufacturer used.
What should an EU declaration of conformity contain?
- The manufacturer's name and address, and the product model or type reference, matching the product you are buying.
- A statement that the declaration is issued under the manufacturer's sole responsibility.
- The directives it applies to and the standards used.
- A signature, a date and the name and function of the signatory.
What should you request before ordering?
- The declaration of conformity for each electrical model in the order.
- Test reports or the list of standards, if the project or the insurer requires evidence beyond the declaration.
- The rating label details: voltage, frequency, wattage, plug type for the destination.
- The product manual in the language you need, with safety warnings.
Under the Low Voltage Directive the usual route is the manufacturer's own assessment, so there may be no third-party test behind a CE mark. For high-use items such as kettles and hair dryers, where failure can mean a fire or a shock, it is reasonable to ask for an independent test report as well. Our kettle guide and hair dryer guide cover what else to specify. If you are choosing from a range, the bedroom and bathroom catalogue is the place to shortlist models, and the declaration should be requested for each one before it goes on a purchase order. Keep a folder per project with the declaration, the rating label photo and the delivery note together, because that is the file an auditor will ask for.
Does CE marking apply in the Gulf?
Not on its own. The CE mark is the EU's system. Gulf countries run their own conformity schemes, and a product placed on those markets may need a separate approval. Confirm the requirement for the destination at the national authority before you order, and see our note on vetting a supplier's compliance documents.
CE marking: quick answers
No. A CE mark is the manufacturer's declaration that the product meets the applicable EU requirements. For many low-voltage products no outside body tests it. It is a necessary starting point, so ask for the declaration of conformity and, for high-risk items, an independent test report.