Procurement
Pre-Shipment Inspection and AQL for Hotel FF&E Orders: What to Check and When
A pre-shipment inspection catches faults while they can still be fixed at the factory. How AQL sampling works, the sample sizes for common lot sizes, what to inspect and when to book it.
By Anastasios Antoniou4 min readPublished
A pre-shipment inspection checks a random sample of finished, packed goods against the approved sample and the order before the container leaves the factory. AQL (acceptable quality limit) sets how many defects in that sample you will tolerate. Book it when 80 to 100 percent of the order is produced and packed, so faults can still be fixed.
Finding a fault in a container in Limassol is a claim. Finding it in the factory is a rework. The inspection is cheap compared with either a damaged delivery or a delayed opening.
What is an AQL inspection?
AQL sampling comes from the ISO 2859-1 tables. The inspector picks a sample size from the lot size and an inspection level, then counts defects. If the count is at or below the accept number, the lot passes. If it reaches the reject number, the lot fails and is reworked or re-inspected. The standard is paywalled, so confirm the figures below against the version named in your purchase order.
Defects are split into three classes. Critical defects are unsafe or illegal and are normally set at zero tolerance. Major defects make the product unusable or unsellable. Minor defects are cosmetic or small deviations. Buyers commonly use AQL 2.5 for major defects and 4.0 for minor ones, with General Inspection Level II.
What sample sizes do common lot sizes need?
- Lot of 501 to 1,200 pieces: sample 80. At AQL 2.5 the lot passes with 5 major defects or fewer and fails at 6. At AQL 4.0 it passes with 7 or fewer.
- Lot of 1,201 to 3,200 pieces: sample 125. At AQL 2.5 the lot passes with 7 or fewer and fails at 8. At AQL 4.0 it passes with 10 or fewer.
These are the normal single-sampling figures at General Level II. Note that a lot passing at AQL 2.5 can still contain a few percent of defective units. If a defect would be costly in a guest room, such as a loose electrical connection, set that defect as critical, not major.
What do inspectors check on hotel FF&E?
- Quantity and packing: carton counts, marks and labels match the packing list, and cartons are strong enough for the route.
- Conformity to the approved sample: size, colour, finish, fabric and fittings checked against the sample you signed off.
- Workmanship: stitching, joints, scratches, stains and loose parts.
- Function: electricals tested at the correct voltage, locks and hinges operated, drawers run.
- Documents: marking and conformity documents present, as in our CE marking guide.
The approved sample is the benchmark. Without it, an inspector can only check against a description, and arguments follow. Our mock room guide explains how to sign off the standard before production.
When should you book the inspection?
Book it for when production is 80 to 100 percent complete and the goods are packed. Earlier, the sample is unrepresentative. Later, the goods are in the container and a fix means unpacking. Allow two to three working days for the report and several more for rework and a re-inspection if the lot fails. Build that into your plan alongside the lead times by category.
Is inspection worth it on a small order?
On a single pallet of stocked goods from a supplier you know, a full AQL inspection may cost more than it saves. The case for it grows with order value, with made-to-order items and with a hard opening date. For small orders, ask for photos of the packed goods and a short check of one carton, and read our supplier vetting checklist before you rely on a new factory. Stocked lines in our catalogue ship in two to four weeks, so a problem is found and replaced sooner than on a factory order.
Pre-shipment inspection: quick answers
AQL stands for acceptable quality limit. It is the maximum number of defective pieces found in a random sample that still lets the lot pass. Buyers set separate limits for critical, major and minor defects, and a common choice is zero for critical, 2.5 for major and 4.0 for minor.